The 10 Most Scariest Things About Patio Screen Door Repair

Patio Screen Door Repair - How to Do it Yourself

A worn or torn screen door isn't only ugly, it also provides an ideal entrance point for mosquitoes, flies and other pests. While there are services to repair your patio door locks repair screen door, it is fairly simple to do the job yourself.

First, lay the screen on a flat work surface. Remove the handle by taking off the screws that hold it in place.

Screens damaged

It's not surprising that your door or window screens will develop holes and tears due to weather, pets, and children. These damaged sections are not only ugly, but also allow pests tilt and slide patio door repairs flies into your home. Fortunately, fixing the problem is fairly easy. While patch kits and screen repair tape provide an easy fix for minor damage, they aren't suited to larger issues. This step-by-step guide will explain how to repair and replace your screens' windows and doors.

Analyzing the damage is the first step. Can you salvage the frame, or does it need to be replaced? It is important to take into consideration this because windows and door screen frames are more likely to be damaged than the mesh. A bent frame may cause the screen to fall out of place and cause holes or weak spots.

Once you've determined whether the frame is salvageable, you can begin to tackle the mesh. For this task you'll require a few essential tools. A spline roller to press the spline into the frame, an utility knife and scissors are all essential for this process. These tools will ensure accuracy and durability when you do repairs.

If you're dealing with an extensive hole, start by cutting away as much of the old screen as is possible to create a clean opening. Cut an entirely new screen material that is at least a half inch larger in all directions than the damaged area. Make sure the patch matches the grid pattern of your window, if it has one. Cut the edges to eliminate any imperfections. Fold over the spline's ends to hide them.

When purchasing your replacement screen, make sure you consider the climate in the area you live in. Aluminum screens are strong and resistant to snags while fiberglass mesh is well-known for its low cost and flexibility. You could also choose a specially designed insect screen mesh if your area is a victim of mosquitoes and other pests. Whatever type of screen material you pick, be sure you stretch it tightly across the frame to avoid sagging or wrinkles.

Broken Rollers

A damaged roller can be a major problem. Not only does it make sliding patio door repair your door difficult, but it can also allow bugs and other undesirables to enter your home. The good news is that repairing the rollers doesn't have to be as difficult or costly as replacing the entire door.

Begin by inspecting the rollers to determine what the issue is. You might find that the wheel has sunk or worn out on one end due to the constant contact with track. Try to remove the wheels by putting an screwdriver between the bracket and the roller. If you still can't remove the roller then spray the shaft with WD-40, and try again.

It's also a good idea to take a look at the tracks, top and bottom. You can straighten bent tracks by hammering an object of wood against the bent portion. It is important to wash the tracks well as they could accumulate dust and grit.

After you've identified the type roller that is broken and you are able to purchase the replacement. Bring your old rollers to the hardware store so you can ensure you're purchasing the correct model. If your door has more than one roller, you'll need to buy enough to replace all of them.

Use a screwdriver to the inside of the door frame, near the rollers to loosen the adjustment bolts or screws. Once the screws have been loose, you can take the rollers from the bottom. It's best to have someone help you with this step, so that you can free up your hands to focus on removing the rollers.

Once the new roller is installed, the door can be raised and the bolts or screws that adjust can be tightened. Examine the alignment of the track and the rollers. If everything is in the correct place, your patio screen should slide into place easily.

Damaged Frame

If your screen door is scratching against the frame, there are a variety of ways to fix it. First, ensure that the hinges are secure. Doors can become sluggish if the hinges are loose. If they are loose, tighten the hinge screws. If this isn't working, you might have to sand the frame's top to make it smooth.

A rotting frame is a frequent issue with screen doors. It is costly to repair since the frame will have to be replaced. To avoid this, keep on the lookout for any indications of rot. Make sure to treat them as soon as you spot them. Look for signs of decay by looking for wood that appears darker than the rest of the frame. Be on the lookout for any areas in which the wood is beginning to warp or bow. Contact a professional if observe any of these issues.

A mesh patch kit can be used to repair a damaged frame. The cost of these kits is between $2 and $7. The kit includes a small piece of mesh and glue, that you can use to fill any holes in your screen. If the damage is minor, you can try to repair it using wood filler. To accomplish this, you'll need to apply the wood filler on the area that is damaged and wait for it to dry before sanding the area smooth.

You can buy a framelift which is a metallic structure that is bolted to the frame you already have that lifts it up. This is a costly option, but is the best if your frame is badly damaged or rotted.

To make an easy stand for your screen door you can create legs from a scrap piece of wood or a photo frame display stand. Then, attach the brackets or wire to the back of the frame to hang it on the wall. You can even attach a piece of felt to the frame's bottom to protect your wall from scratches.

Broken Splines

A damaged screen spline could be just as frustrating to handle as a damaged frame or door. It might seem like an issue that can be overlooked. However, if you let it go for too long, pests such as mosquitoes and flies can slip through. This can quickly turn into a larger problem, resulting in expensive repairs or a new screen door.

It is not difficult to repair a damaged screen spline if you have the right tools. First, you'll need remove the old screen door spline. This can be done by placing the frame flat on a work surface, like a table or the ground. Take the spline off by using a screwdriver. If the spline is particularly damaged or worn, you could discover that it breaks when you attempt to remove it from the groove.

When you take off the old spline, make sure you take off the caulking that was used to hold it in place. This will help ensure that the new spline is properly fitted in the grooves.

After you have removed all of the old spline a knife to cut any excess screen from the frame. This will ensure that you have a clean, tight fit on all sides of the frame once you put in the new spline.

Installing the new spline is straightforward after you have cleaned the frame and cut the new screen material to the appropriate size. Start by putting it on one of the shorter sides of the frame. Lay the spline down, and then begin rolling it with your splining device to work it into the screen channel. Continue rolling the spline and pushing it into the screen channel as you move. Continue this process for each short side of the frame. While you are working try to keep the screen taut using spring clamps or tape.

Repeat the process on the opposite side after you have completed the splining of all short sides. Complete by splining both of the top and bottom edges of the frame.