Guide To Upvc Window Replacement Hinges: The Intermediate Guide The Steps To Upvc Window Replacement Hinges

Choosing Upvc Window Replacement Hinges

Choosing and fitting upvc window replacement hinges isn't as difficult as you might imagine. Make sure the arrows on the hinges face the right way and measure the thickness of the hinge arms on the frame that opens (13mm or17mm).

There are a few different kinds of hinges that you can pick from, each one with distinctive features. This article will discuss the most commonly used types of uPVC window hinges and their advantages.

Egress/Easy Clean Hinge

These are a great choice to replace or upgrade your fire escape window since they open up to a full 90-degree angle. They can be closed to an easy-clean position which allows you to get access to the outside of windows without the need to climb ladders or lean over dangerous angles.

These heavy-duty egress hinges are made by Yale, one of the most popular and reliable home security brands available today. They can be used with all kinds of uPVC side-hung windows. They can be moved to the clean position by pressing an unassuming button, and then sliding the window sash to one side. When the sash is closed, it will automatically return to its initial position.

They are available in 13mm and 17mm stack heights. Use our Egress Selection Guide to help you select the best product for your window.

These hinges can be used with traditional side-hung frames made from aluminium or uPVC. The friction screw is used to adjust the resistance. This makes opening the window more simple and reduces the chance of accidental closing during high winds. They have been cycle tested to more than 30000 cycles and comply with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

The Nico Egress Easy Clean friction hinge is easy to operate and has no buttons or catch. It offers a convenient and safe option for emergency exits and cleaning. Firstly, open the window to the egress (full opening) position, then press the hinge retaining clip located on the inside of the bottom corner. This will open both the top and bottom catches which will allow you to move the sash towards the clean position. Once it is in the easy-clean position, close the window to return the hinges to their egress position.

Fire-Escape Hinge

Fire Escape Hinges, often known as "Easy Clean" hinges are used to replace windows that open sideways to allow egress (fire safety) reasons. These types of upvc door hinges of window hinges are more spacious and more efficient than standard hinges to allow an open space to escape in the event of an incident of fire. Building regulations require that this type of hinge should be placed in any space that is habitable and has a window.

They have an exclusive friction stay that allows the window to open at a 90 degree angle and allows the opening sash to slide across when open to make it easy to clean the exterior side of the glass without needing to climb ladders. The hinges have no fiddly buttons or catches and operate with a simple, secure lever that can be accessed from the inside of the home.

The hinges, made in the UK by Cotswold are fitted with the safety of children in daily use. This can be overridden with an invisible button. You'll have peace of assurance that your children won't accidentally open the windows too wide. The stack heights are 13mm or 17mm.

Find the length of the side-hung window hinge, which is fixed to the frame. (See the article on measuring upvc window hinges). Then select the correct size hinge from the selections below.

Note that this measurement is taken from the part of the hinge that is attached to the frame, not the sash. The actual length of the hinge may be shorter or longer depending on the way your windows were originally made. When choosing the size of the hinge, most upvc frames will fit the 13mm stack height however if your original window frame measures 17mm, you should select this option. You can also install the 4mm packer to make up the difference. All hinges come with two hands (1 left and one right). The hinges do not include screws. If required, these can be purchased separately. Our window repair screws made of upvc are recommended. These are specially made to improve the performance of your hinges and allow them to function smoothly for a longer time. They have a reduced friction design, and an improved weather seal, with a brand new nylon reducer end cap.

Restricted Hinge

There are times when windows must completely open, and this can be difficult using a standard hinge. These child safety friction hinges are an excellent solution to this problem. They can be used in situations where ventilation is required but escaping or cleaning a fire is not feasible. They work by restricting the amount the sash can open, and allow for the override of this restriction with a button. They are available in 13mm or 17mm stack heights and are suitable for both top and side hung windows.

The Nico Restricted Egress Friction hinge combines the features of a standard restrictor with an escape hinge to provide an effective and simple way to comply with building regulations. It is suitable for side-hung and top opening uPVC windows and comes in 13mm and 17mm stack heights. It comes in two parts that has one hinge which is the one that is restricted for egress, and the other being the unrestricted. This allows one to be installed at the bottom while the other hinge is placed at the top.

These uPVC hinges are restrictive and have been tested to BS6375 Part 2. They are intended for use on a window that isn't able to be fully opened, like a small children's bedroom. The mechanism limits how far the sash opens up to 100mm in a safe distance, and re-engages once the window is shut.

These uPVC friction-style hinges can be used with all types of upvc door hinges of windows. They are particularly suitable for windows that are difficult to reach, like those in three-storey houses or ones that require ladders. They can be upgraded by our security features, including hinge guards and protection plates for the hinge or dog bolts to attain PAS 24 performance.

When replacing a window hinge, it is essential to determine the length of the current hinge so you can order replacements that match in size. The most efficient method to do this is to look at the hinge in the gallery and working out the location you would like it to be positioned. Top hung hinges are restricted on both sides and the side hung hinges can only be used on one side.

Standard Hinge

Standard hinges use metal-to-metal connections and do not require any extra parts to reduce friction. It's available in a variety of finishes and is also fire-rated. To determine the radius of your hinge, lay it flat and line up with a quarter and dime in two corners. If the dime fits better and the corner is round by 1/4 inch; if the quarter fit better, it's rounded by 5/8 inch.

The right hinge can make or break the appearance of your door. It's essential to match the finish and style of your patio door hinge replacement with its hinges for a cohesive look that's both practical and visually appealing.