Guide To Upvc Window Replacement Hinges: The Intermediate Guide The Steps To Upvc Window Replacement Hinges

Choosing Upvc Window Replacement Hinges

The process of selecting and fitting upvc window hinges for replacement isn't as difficult as you may think. Make sure the hinges' arrows are facing the correct direction and determine the thickness of the hinge arms on the opening frame (13mm or 17mm).

There are several different types of hinges, each having their distinctive characteristics. This article will review the most commonly used types of uPVC window hinges and their advantages.

Egress/Easy Clean Hinge

They are a great option for replacing or upgrading the fire escape safety window since they can be opened at a 90-degree angle. They can be removed in an easy-cleaning position that allows you to see the windows' exterior without the need to climb ladders or lean over dangerous angles.

These egress hinges are heavy-duty and are made by Yale, one of the most popular and reliable home security brands on the market today. These hinges are suitable for any type of uPVC side hung window. By pressing a tiny button, the window sash can be moved to the side, and then into the position that is easy to clean. After closing, the sash will be reset to its original position.

Both 13mm and 17mm are available. Based on the size of your window, we recommend using our Egress Selection Guide to determine which one is the best fit for you.

These hinges are compatible with traditional side-hung frames made from aluminium or uPVC. They come with a simple friction screw to adjust the amount of resistance generated. This allows for easier opening of the window and reduces the risk of an accidental closure in severe winds. They have been tested for more than 30,000 cycles, and comply with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

There are no buttons or catches The Nico Egress Easy Clean friction hinges for timber windows Hinge is simple to operate and provides a simple solution for emergency egress and safe cleaning. First, open the composite door hinge replacement to the egress (full opening) position, then press the hinge retaining clip that is located on the inner side of the bottom corner. This will release both the catches on the top and bottom allowing you slide the sash to the easy-cleaning position. Close the window once you have the sash in an easy-cleaning position. This will set the hinges back to their exit positions.

Fire-Escape Hinge

Fire Escape Hinges (also known as "Easy Clean") are used to replace windows with side openings to protect against fire. These hinges permit a larger opening in the event of fire. Building regulations require that this kind of hinge has to be set in any room that has a window.

They have a unique friction stay that allows the window to open at 90 degrees and allows the opening sash to slide across when it is open to make it easy to clean the exterior side of the glass without needing to use ladders. The hinges have no fiddly buttons or catches and operate with a simple, safe lever that is accessible from inside the home.

The hinges, made in the UK by Cotswold and Cotswold, have a child safety restriction for every day use. This can be overridden with a hidden button. You will have peace of assurance that your children won't accidentally open the windows too far. They are available in 13mm and 17mm stack heights.

To order these hinges simply measure the length of your existing side-hung window hinge which attaches to the frame (see the article on measuring the length of your window hinges made of upvc). Choose the right size hinge below.

It is important to note that the measurement is taken from the part that is fixed to the frame not the sash. The actual hinge length may be shorter or larger based on the manufacture of your old windows. When deciding on the width of the hinge most upvc frames will fit the 13mm stack height however if your original window frame measures 17mm, you should select this option. Alternately, you can install the 4mm packer to make up the difference. All hinges come in two different directions (1 left and one right). Screws aren't included with the hinges. These can be bought separately if required. We recommend using our upvc window hinge repair door hinge screws. These are specially made to improve the performance of your hinges that allow them to run smoothly for longer. They come with a lower friction design and a heightened weather seal that includes an encapsulated nylon reducer cap.

Restricted Hinge

There are times windows need to completely open, and this can be a challenge with the standard hinge. These child safety friction hinges are an excellent way to solve this problem. They can be used when ventilation is required, but escaping or cleaning the flame is not possible. They restrict the amount of opening the sash, and allow for the bypass of this limitation by pressing an appropriate button. They are available in 13mm and 17mm stack heights. They can be used to open top and side-hung windows.

The Nico Restricted Egress Friction Hinges combine the features of both a standard restrictor and a fire escape pivot to provide a simple but efficient method of complying with building regulations. It is suitable for side hung and top opening uPVC windows and is available in 13mm and 17mm stack heights. It is available in two parts, with one hinge being the one with restricted egress and the other the unrestricted. This lets one hinge be placed at the bottom, while the other is installed on top.

These uPVC restrictive hinges have been tested to BS6375 part 2. They are intended for use on a window that cannot be opened fully like a small child's bedroom. The mechanism limits how far the sash opens to a safe position of 100mm and then re-engages when the window is closed.

These uPVC friction-style hinges can be used on all kinds of windows. They are especially useful for windows that are difficult to reach, such as those in three-storey homes or those which would require ladders. They can be upgraded by our security enhancements, like hinge guard protection plate or dog bolts, in order to achieve PAS 24 performance.

It is crucial to take measurements of the hinge on your current window to be able to find replacements that are the same size. The easiest method to do this is to look at the hinge in the image gallery and determining the location you would like it to be positioned. Top hung hinges are restricted on both sides, while side hung hinges are restricted to one side.

Standard Hinge

A standard hinge is made of metal-to-metal contact, and there are no additional components to reduce friction. It's available in a range of finishes, and is fire-rated. To determine the radius of your hinge put it on its flat surface and align the quarter and dime in two corners. If the dime is more snug, the corner is rounded by 1/4 inch; if the quarter fit better, it's rounded to 5/8 inch.

The right hinge can make or ruin the appearance of your door. Matching the style and finish of the hinges to your door will create a cohesive and attractive appearance.