Guide To Upvc Window Replacement Hinges: The Intermediate Guide To Upvc Window Replacement Hinges

Choosing Upvc Window Replacement Hinges

It's not as difficult as it might seem to choose and fit the replacement hinges made of upvc. It is important to check the arrows on the hinges is facing the correct way and also the thickness (13mm or 17mm) of the hinge arm on the opening frame.

There are a few different kinds of hinges that you can pick from, each with unique features. This article will review the most common kinds of uPVC window hinges and their advantages.

Egress/Easy Clean Hinge

They are a great option for replacing or upgrading windows for fire escapes, as they can be opened at a 90-degree angle. They can also be removed to an easy clean position, allowing you to easily reach the outside of windows to clean them without having to climb on a ladder or lean over at potentially hazardous angles.

Yale is among the most reputable and well-known brands in the field of home security. These hinges are suitable for any type of uPVC side-hung windows. By pressing a small button, the window sash can be moved to the side, and then into the position that is easy to clean. Once closed, the window sash will be returned to its original position.

Both 13mm and 17mm are both available. Use our Egress Selection Guide to help you select the best product for your window.

These hinges are designed to work with a standard side-hung frame, either uPVC or aluminium hinged doors. They are fitted with an easy friction screw that can alter the amount of resistance that is generated. This makes it easier to open the window and reduces the chance of a mishap during severe winds. They have been cycle tested to over 30000 cycles and comply with BBA/Secured by Design and British Standards approved BS EN 13126-6:2008.

The Nico Egress Easy Clean friction hinge is easy to operate and doesn't have any buttons or catch. It provides a convenient and safe option for emergency exit and cleaning. First, open the window to the egress (full opening) position, and then press the double glazing hinge repairs retaining clip on the inner side of the bottom corner. This will open both the catches on the top and bottom allowing you move the sash into the easy-cleaning position. Close the window when you have the sash in an easy-cleaning position. This will set the hinges back to their Egress positions.

Fire-Escape Hinge

Fire Escape Hinges (also known as "Easy Clean") are used to replace upvc window hinge windows that open sideways for fire safety reasons. These kinds of hinges for windows open wider and faster than conventional hinges to provide an expansive clear opening for escape in the event of a fire. Building regulations require that this kind of hinge should be placed in any room that has a window.

They feature an exclusive friction stay that opens the window to 90 degrees and also allows the sash opening to slide across when it is open for easy cleaning of the external side of the glass without needing to climb ladders. The hinges are simple to operate and don't have complicated buttons or catch mechanisms. They can be operated from the inside of the house with a simple, safe lever.

The hinges are manufactured in the UK by Cotswold and come complete with a child safety restrictor for day-to-day use which can be turned off with a hidden button, providing you with peace of mind that your children won't accidentally open the window too far. They are available in 13mm and 17mm stack heights.

Find the length of the existing side-hung window hinge, which is fixed to the frame. (See the guide for measuring the size of Upvc window hinges). Choose the right size hinge below.

Please note that this measurement is taken from the hinge's point that connects to the frame and not the sash. The actual hinge length may be shorter or longer dependent on how the windows were originally made. Also, when choosing the size of your hinge, most windows made of upvc will have a 13mm stack height but should your old window frame has 17mm, then select the option to use this. You can also utilize the 4mm packer in order to compensate for the difference. The hinges are available in two different directions (1 left and one right). The hinges do not include screws. These can be bought separately if required. Our window repair screws made of upvc are recommended. These are specially made to improve the performance of your hinges, allowing them to operate smoothly for a longer time. They have a lower friction design and an improved weather seal, with a brand new nylon reducer cap.

Restricted Hinge

Standard hinges can make it difficult to open windows fully. These child safety hinges are a solution to this problem and offer a fantastic solution when ventilation is needed but access for cleaning or escape in case of fire is not possible. They limit the possibility of opening the sash and allow overriding this limitation by pressing the button. They work with both top and side hung windows and are available in 13mm and 17mm stack heights.

The Nico Restricted Egress Friction Hinge blends the features of a standard restrictor as well as an escape hinge to offer an effective and simple way to comply with building regulations. It is suitable for both side hung and top opening uPVC windows and comes in 17mm and 13mm stack heights. It is offered as a pair of hinges where one hinge is restricted egress, the other unrestricted, allowing one hinge to be placed to the bottom of the sash whilst the other is attached to the top.

These uPVC hinges are specifically designed to be used on windows that aren't able to be fully opened, such as bedrooms for children. The mechanism limits how far the sash opens to 100mm in a safe distance, and re-engages once the window is shut.

Like the other kinds of uPVC friction hinges they can be installed on all types of windows and are perfect for difficult to access windows above the ground level, three-storey flats or those that typically require a ladder to reach them. They can be combined by our security features like hinge guard protection plates or dog bolts for PAS 24 performance.

It is essential to measure the hinges on your window in order to get replacements that are the same size. The easiest way to do this is by viewing the hinge in the image gallery and working out the location you would like it to be placed. Top-hung hinges are limited on both sides and the side-hung hinges are only restricted only on one side.

Standard Hinge

A standard hinge has metal-to-metal contacts and has no additional components to reduce friction. It is available in many finishes and also comes with an NFPA-certified fire rating. To quickly determine the radius of hinges, lay them out flat and place a quarter and dime in two corners. If the quarter fits better then the corner should be round to 5/8 inches.

The right hinge can make or break the look of your composite door hinge replacement. It's essential to match the finish and style of your composite door hinges adjustment with the hinges to create a unified look that's both practical and visually attractive.