A Delightful Rant About Fiat 500 Replacement Key Fob

Add a Sparkle to Your Fiat 500 Key Fob

These adorable Silicone Covers can add a bit of excitement to your Fiat 500 Key fob. They're easy to put on and snap in place of your original black cover.

The silicone covers protect the keys from splashes, dust and other contaminates. The covers made of silicone also make your keys look more elegant. The signals of the remote control are not affected and continue to work even when the cover is closed.

Protect your key from splashes, dust, and other contaminants

Add a stylish touch to your key by using this silicone cover. It will fit perfectly over the key fob, without loosing. It protects your key from splashes and dust. The signals generated by your key remote are not affected by the silicone cover which means you can use the buttons on your key fob as normal.

Accessorize your Fiat 500 in Grey or Black with these cool covers. These covers are ideal when your original cover is looking a bit worn, scratched or damaged. The covers are made of high-quality silicone and come with two key rings so that you can switch them out if you get bored with the same colour.

These covers replace the stock, black key cover that is on your vehicle. You will need to remove the original key cover before you can install these covers.

Great look!

fiat key programming is a distinct and renowned Italian brand and their cars sport an amazing style which makes them stand out from the crowd. These dazzling car key covers are a simple and enjoyable way to add some elegance to your keys without being too overpowering. They look fantastic on your key fob, and can be used to refresh a worn-out one.

The covers snap in the desired position and are designed to replace your black cover. It is a good idea to remove the previous cover prior to installing the new.

The Fiat logo is printed in both Grey and black. You can change the colors if you decide to! They also make excellent gifts for Fiat 500 owners.

Easy to install

program fiat 500 Key fob (hyldgaard-velling.blogbright.net) 500 key covers can be a great method to make your keys more modern. You can choose from a variety of colors and styles to find one that best suits your personal style. The most attractive thing is that they're simple to install, meaning you can install them in just 10 minutes. You'll need a screwdriver and some patience. The first step is removing the cover that was originally installed. This has to be removed before the new cover can be put in place.

After removing the old cover, use a flathead screwdriver to pry out the four main attachment clips located on the side that is on the passenger side of the fob assembly. These are marked with red on the picture below. Be aware of the yellow locating tabs that must also be disconnected.

After taking the battery off, replace it with a new CR2032 3 Volt coin cell battery. The "+" side of the battery should face the opening on the fob and the "-" side should be facing the rubber buttons.

Reattach the mirror's passenger side cover by aligning the locating tabs. Once you've completed this place the fob that's on the driver's side back in your car key cover fiat 500 and test it. Press the push button on the front of the key. If everything is working correctly the parking lights will be activated and the doors will close.

Easy to remove

Fiat 500 Key Covers are an excellent way to upgrade your key fob. They're easy to install and offer a unique look. They also protect your key fob from smudges and scratches. For you to replace the cover, you'll first need to remove the old one from your vehicle.

This can be done by pressing the red "Fiat" button located on the front of your key fob. When you press the button, you will release a lever which allows you to slide out the metal ignition switch (1). After you remove the metal keys you will see an unassuming silver switch that has images of a padlock locked and unlocked beside it. This is the battery switch on the key fob. The battery is easy to replace by turning the switch a quarter turn with a small screwdriver with a flathead.

The key fob comes with an embedded microchip that's used to communicate with the Body Control Module (BCM). When you insert your Fiat key it presses the button on the ignition switch. This is used to remind you of the "key-inignition". The BCM will detect the transponder in the key fob in order to confirm that it's a valid key.

You can also add a design twin pack to your key covers to give it a unique and funky look. These covers snap over the original cover. They are available in Cream or silver. The key cover can only be used when the original black cover is removed from your key code fiat fob.