10 Autowatch Ghost Immobiliser Fitting That Are Unexpected
Ghost Immobiliser Installation
Add a ghost immobiliser your vehicle to protect it from car thieves. Our TASSA-verified system protects against key cloning, hacking, and bypassing the vehicle immobiliser.
The system is hidden within the wiring loom of your vehicle and is inaccessible to anyone who is looking. It works by creating the pin code push sequence by using buttons already on the steering wheel doors, door cards and the central console.
No circuit cuts
It's not a surprise that people are concerned about protecting the vehicle they've spent so how much is a ghost immobiliser money to purchase. However, traditional security devices like wheel locks and alarms can easily be snatched away or bypassed by thieves. A ghost immobiliser however is a highly efficient solution that operates in a quiet manner and isn't easily detected by modern thieves.
A ghost immobiliser is a hidden device that connects to your vehicle's CAN data network to shut down the engine without the use of radio frequencies or key fobs. It communicates with the vehicle's ECU by using buttons on the steering wheel, dash and door panels, to create an unique pin code that only you can access. The code can be changed at any time, and can contain up to 20 digits depending on your preference. It comes with an emergency code that you can use in the event of forgetting your PIN.
The ghost immobiliser is also beneficial to stop the relay box inside your home from transferring the signal of your car key, which could open the doors and start your vehicle. It could also block the latest high-tech methods of stealing your car such as OBD port hacking. The device is small and weatherproof, so it's difficult to detect and even harder to tamper with.
Another advantage of the ghost immobiliser is that it can be put inside your car without permanent marks. It's ideal for those who plan to sell their car in the near future. It's also quicker and easier to install when compared to a factory-fitted model.
The Autowatch Ghost is a revolutionary next-generation device that blocks vehicles that are stolen through contactless by connecting to the vehicle's CAN data network and using existing buttons to generate a unique PIN code. This is a stealthy device that can be installed with no wires cut and does not require additional key fobs. It is also connected to the vehicle's original ECU to prevent thieves from gaining access to it using new keys or replacing the ECU with the use of a "relay". This system is TASSA-certified and is able to be linked to an International Security Register. Owners will be able to rest easy, knowing that their vehicles are secured from theft.
No scanning by RF
If you've invested an enormous amount of time and money in the customization of your vehicle, you'll want to protect it from theft. One of the best ways to accomplish this is to install an immobiliser, which will stop your engine from running until you enter a unique PIN. You can generate a 20-digit code using the buttons on your dashboard or the steering wheel. This will ensure that only you have the right to drive your car. It is also possible to set up a service and valet mode, which will allow you to start your car temporarily without entering the PIN code. This will allow technicians to work on your vehicle without being present. This is a great option for those who wish to cut down on time and make their lives easier.
A ghost immobiliser is a next-generation device that connects to your vehicle's CAN data network, and uses the buttons on the dashboard and steering wheel to program a unique PIN code. It is designed to be stealthy, with no LED indicator or noise to make it obvious and can be installed anywhere on your vehicle without impacting the look of your pride and joy.
This stealthy system is approved by TASSA and can reduce the cost of insurance. It also comes with an ability to track your vehicle that allows you to locate your vehicle even if it has been stolen. This is great when you own a unique expensive vehicle which you've invested many hours customizing.
The autowatch ghost 2 immobiliser Ghost can be used together with an iPhone application to allow you to remotely start your vehicle in the event you have forgotten your PIN or are not able to access the vehicle for some reason. This feature is great if you need to take your kids to school or run errands, but don't want to risk having someone else drive your vehicle. This feature is helpful if you have to take your car in for repair or service.
The Ghost is unique in that it does not transmit or detect radio frequencies, so it is undetectable by thieves who use RF scanning and code grabbing technology. It can also protect your car from key duplicates, ECU swapping and other common methods of car theft.
No key how to become a autowatch ghost installer cloning
ghost installations review immobilisers are a fantastic option for protecting expensive automobiles and are designed to block key copying. They work by preventing your car from starting unless an additional PIN code is entered in conjunction with the standard key fob. This makes it very difficult for thieves to steal your vehicle, and may even discourage them from trying. This is a good idea if your vehicle has been extensively modified or is a rare model.
The immobilisers are connected to the vehicle's CAN data network onboard and are completely hidden, which means their presence isn't evident. It is also difficult to identify using radio frequency scanning technology or code grabbing. This means that a burglar must spend a lot more time in order to take your vehicle.
To bypass the system thieves need to be aware of the pin code and the location of the Ghost. The pin code is specific to you and can be altered as many times as you like. The pin code is simple to remember, but mathematically unattainable for someone else to figure out. The engineer will also provide an emergency PIN code in the event that you forget the pin.
The Ghost CAN bus immobiliser is weatherproof and easily installed in any location of your vehicle. It is compatible with all vehicles and fully customisable to match the style of your vehicle. It is also extremely cost-effective and simple to use. You can even transfer the device to a different vehicle if you decide to change vehicles during the course of ownership, providing that the new vehicle is compatible with it.
The immobiliser for the CAN bus is compatible with a number of other security features. For instance, it could detect damage to your vehicle and notify the owner. It can also shut down the engine if the vehicle is damaged. The system also protects your vehicle from hacking and key cloning. It also detects vibrations and contact with the vehicle. In addition, it can alert the owner if the vehicle has been moved.
No OBD port hacking
Ghost uses a hidden module that is connected to the CAN data network of your vehicle. This will stop thieves from getting into your vehicle to disable the alarm, deactivate your key fob, or create new keys. This technology is a major improvement over the methods employed by thieves in the past to steal your vehicle. The CAN data networks also means that your system won't be affected if you disconnect or change your battery.
The Autowatch Ghost is the first aftermarket CAN bus non-detectable immobiliser that guards against hacking, key-cloning and replica car theft. It doesn't use LED indicators or key fobs. Instead, it uses the buttons on your steering wheel, console and door panels.
Modern thieves employ diagnostics to identify circuit cuts on your vehicle. They can bypass immobilisers that require a large amount of wiring or are incorporated into the wiring. The Ghost is weatherproof, doesn't require additional wiring and isn't detected by professional diagnostic tools. It can be used on vehicles equipped with anti-theft devices.
Another benefit of a Ghost immobiliser is that your vehicle is only able to be started by someone who knows the PIN code and has physical access to your car. This is a significant advantage over traditional security systems that can be tampered with by simple cable tampering or a screwdriver.
You can easily reset your PIN in case you forget it by using the emergency PIN override feature of your mobile or computer. This is useful if need to start your car after it has been left in a garage or using the help of a valet parking service.
The Autowatch Ghost 2 has been approved for insurance by TASSA and can be installed by our authorised installers. It features a QR fingerprint system to identify individual parts, which allows for the return of stolen items in the event that they are found. It can also be turned into a service mode' which permits the engine to be started when your vehicle is in a garage or with valet parking but you will need to enter your PIN code once more to exit the car.
