What Are The Myths And Facts Behind Saab 9-3 Key Replacement

how To get a saab replacement Key to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a distinct procedure to add the second key. It requires dealer support using an electronic handheld computer called Tech-2. Then the transponder must be replaced and a key need to be purchased.

Make sure to rotate your keys in order to prevent one from wearing out more than the other. This will also keep your keys in good condition.

Replacement Case

The new key fobs are not like the old Saab keys. They have electronics that make them difficult to duplicate. This has made theft of cars much more difficult than it was twenty years ago. It also makes it more expensive to replace keys lost.

Every owner of a saab spare key 9-3 must have at a minimum two functioning keys. It's expensive to replace a lost or damaged key since it requires replacing the CIM module, as well as programming the locking cylinders. Dealers charge between $100-$200 for this.

There are ways to reduce the high cost. Some parts dealers will use the code of a spare key to cut a new metal blade at a fraction what the dealer charges. The key, however, must be identical to the original in order to function within your car.

Follow these steps to replace the case. You will need a flathead screwdriver along with some patience. With the screwdriver, you can pry apart the plastic, and then take off the emergency key. Once the case is open take the electronics out and place them into your new case. Make sure you insert the correct badge and key back into the case as well.

Replacement Battery

The Saab 9-3 replacement battery is a budget part that can be quickly and easily replaced. The YouTube video of Cyclone Cyd demonstrates how to open a saab 93 without a key you can replace the battery of the remote fob with just four easy steps. This guide should work with any modern-day saab key fob however, the procedure may differ slightly.

The first step is to locate the button that releases the backup key on the fob. The button is usually found on the back of the fob, just below the saab 9-3 key fob replacement Logo. Use a flathead to insert the screwdriver into the small hole on this button. This will be enough to allow you to open the case of the fob so that you can replace the battery.

After you have installed the CR1632 batteries, you can rebuild the remote key fob. Then, you can program it into your car. The entire process should take no more than an hour, if not less. It's a very easy process that does not require any special equipment.

If you lose your key, the procedure will be slightly more complicated but it is still able to be accomplished. The dealer must find the VIN number of the car and then purchase a replacement key blade and TWICE module, both with the exact unique code. The dealer will then have to program the key using MDI, a new software tool.

Replacement Key Fob

The key fob is equipped with an internal battery that is used to lock and unlock your vehicle. They have a limited life span and eventually will die. This is a frequent issue that affects all cars. The good news is that you can replace the battery on most key fobs, without having to replace the entire case. Amazon sells replacement fobs that have all the electronic components in place. It is easy to remove the case and replace the batteries. It is important to keep in mind that you'll need to take out the emergency key first, and you can accomplish this by inserting the screwdriver of a small flathead into the slot in the middle of the case. Work the screwdriver around the case until it is split open, making it much easier to remove.

When you're ready to replace the keys, make sure you have a spare as this will reduce the total cost by a significant amount. If you have a spare, you can have the dealer cut a new key and program it to your car, which is cheaper than replacing the whole key fob.

It is possible to add a second key to your vehicle If you don't already have one, but it takes an extensive amount of research and work. Adding a second key costs around a hundred dollars and also requires programming of the car's computer. Professionals can do this, but it's an expensive option.

Replacement Ignition

Contrary to earlier Saab vehicles, the latest SAAB 9-3 models are equipped with an advanced alarm system that is built around a coded key. This means that should you lose only one functioning key, getting another one could be very expensive because the car needs to have a specific computer module fitted and also must be specially designed to accept a different key. Dealers can charge hundreds of dollars to program an additional key even if they're unable to complete the task.

If you've lost your only working key and a dealer is able to replace the computer in your car (known as the CIM or saab car key TWICE) to make a replacement, and will charge a premium for it. Instead, we can reprogram the EEPROM of your current car computer to prepare it for a replacement key, saving you over 50% of what you'll spend at a dealer.

If you've owned a saab replacement key 9-3 many years, you know that the ignition keys are not very durable. They can become incredibly sticky and the buttons are known to fall off from time to time It is recommended that you consider replacing your ignition key if it isn't functioning properly. It's not as difficult as it appears to replace the ignition key. With the right tools, it can be done quickly.