10 Meetups About Saab 93 Key Fob You Should Attend

How to Replace a Saab 9-3 Key

The saab car keys 9-3 is an excellent car that offers a lot of appeal for drivers. It is well-lit and has a strong performance engine. It also has a top safety rating.

It is crucial to have two keys that work for your vehicle. If you lose only one key, it can be costly to purchase an additional one.

How to Replace the Ignition Key on a Saab 9-3

If your car key won't start in the ignition it is time to replace it. This guide will walk you through the steps to do it on the Saab 9-3. You will need a replacement key and a new battery that can be reprogrammed and a new key-fob cover.

In contrast to older models, the majority of modern Saab key programmer cars use an electronic transponder inside the key-fob, instead of a physical key made of metal to unlock and start the vehicle. The reprogrammable batteries in the key-fob inevitably become worn out and will not be able to hold charge. This is especially when you use the same key for the lock you have.

The good thing is that the battery is easily replaced by an experienced locksmith. If you've got the right tools, and a little patience you can do it yourself. The first step is to remove the key-fob apart. Insert flatheads into the slot that is in the middle of your case. You must work slowly, as the plastic is very thin and easily damaged.

Once the case is open, you can prepare the new key by combining the lower half of the old key with the transponder and banana on the new key. This will ensure that the new key is mated to the CIM correctly, which can make all the difference when replacing the only key for your Saab 9-3.

How to Replace the Ignition Key in a saab replacement key 900

If you don't have two keys you'll need to take off the steering wheel and dashboard for access to the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, you can take off the dashboard and trim pieces that surround the steering wheel. After the dashboard is removed, you can push a screwdriver into the hole at the back of the ignition switch and pull it out.

The ignition cylinder is equipped with a key lock that can prevent the car from starting if a key isn't inside it. If the ignition switch on your 900 isn't working, look at the key to see whether it's in the lock or stuck in the barrel of the ignition. It's also an excellent idea to rotate your keys often and keep them clean so that one doesn't get bent.

Saab cars differ from other cars due to the fact that they do not use traditional metal keys. Instead, the car is able to recognize electric signals generated by the key fob using an specialized microchip inside.

If you only lose one functioning key fob, your dealer will charge an extra fee to replace your computer module (also called the CIM). We can reprogram the EEPROM of your current computer to allow it to accept new keys, without the need for replacement. This will save you over 50% of the cost the dealer charges! We call it the SAAB KEY PROGRAM. Learn more about it here!

How to Replace the Ignition Key on a Saab 9-5

The metal component of a classic Saab key is simple to copy, and it's also not a major obstacle against theft of a vehicle. The real protection comes from the electronic part in the key-fob, which contains a chip which recognizes your car once it's inserted into your ignition switch.

Saab has relied on the technology of this anti-theft device for more than 10 years. It's not as secure as an actual lock on the door however it makes stealing your own car significantly harder. Every Saab owner needs to keep an extra Saab key in their vehicle.

The majority of new Saabs come with two keys from the factory. However, you can upgrade them at the dealer with a handheld computer called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is the NG 9-3 models, that have more modern, more advanced features that require a key-fob.

The dealer will replace the CIM or TWICE module in those vehicles if all keys are lost, and they'll charge you top dollar to do it. We can reprogram your computer's EEPROM to accept new keys, without replacing expensive modules.

How to replace the ignition Key on an XC90 saab 93 key fob

If your SAAB 9-3 key fob is having issues turning the barrel of the lock it's possible that it's time to replace it. The procedure is quite simple and doesn't require you to visit an agent. You can do it at home using a few simple tools.

You'll first need to prepare the new keys. Before starting, make sure that the anti-theft system is disabled by placing blocks on your rear wheels and activating the handbrake. Insert the key into the ignition and then turn the key to the "on" position. This will activate the accessories, but will not start the engine. Repeat this five times, then turn off the key in the "on" position.

Then you'll need to buy an additional case for your key fob. They are readily available at many auto parts stores and are typically inexpensive. Based on the model, you can even purchase them without electronic components.

To open the case simply push the flathead screwdriver into the slot in the middle. The case will split easily, and when you've got it open, you'll get access to the internal electronics. To remove the electronics, employ a small screwdriver and try to pry them out with a gentle force.