10 Replacement Handles For Upvc Windows-Related Projects That Stretch Your Creativity

Replacement Handles For UPVC Windows

uPVC window handles can become loose and drop off. Fortunately, replacing them is a simple job with the right tools.

Determine the type of handle you have by looking for pins or screws that secure it. Once you've identified them, remove them and carefully pull the handle away from its spindle.

Espag Handle

Espag handles are the most common type of handle found on double-glazing uPVC windows. They're flat with a cylinder shape. They're typically made from uPVC but they can also be made of other materials based on the design and style of your window. The handles also come in a variety of shapes and colours to complement your home's decor.

The espag handle is known as a spade handle or cockspur handle. It's typically found on older uPVC windows and can be used as an alternative for a damaged handle. They're not as secure as modern-day handle designs however they do have an easy locking mechanism. The handle is fitted with two studs in the round also known as mushrooms that are able to move up and down when the handle is turned. They are anchored to an iron plate that is attached to the frame, referred to as the keep. The handle is also available in a cranked model, which offers more space for your hand with a more sleek appearance. Also, there is an inline version.

These types of uPVC window handles are often found on older wooden windows, as well as double-glazed ones. These handles are often made of aluminium or uPVC however they can be constructed from other materials. Window handles made of Espag are locked with a key, or by using wedge blocks that are placed between the frame and handle. They are also simple to maintain and you can buy replacement parts if they break.

You should verify the size of the spindle located at the back of your handle prior to selecting the correct espag handle. The spindle should have a maximum diameter of 7 millimeters. You should also take a measurement of the height where the handle is fixed to the frame of the window. If you choose the right brompton carry handle size, your window will close with a tight seal.

Monkey tail Espag window handles are a fantastic choice for windows with historical designs. They also work well with contemporary windows and come in left-hand or right-hand versions. They have a chic reeded end detail and a slim backplate to fit inside the window frame. They can be locked and are an excellent height.

Venetian Handle

When you are replacing your window handles made of upvc there are many different types of handles to pick from. There are many different styles of handles that you can pick from that include Cockspur handles (also known as Espag handles) blade or spade handles, and tilt and turn handles. The kind of handle you pick will be based on the style of window you have as well as on your personal preferences. Take into consideration the size of the mila door handles and the spindle. It is important that the handle is able to fit into the screw holes, and has the correct spindle.

The cockspur handle used for windows made of upvc is one of the more popular types. They are available in a range of colors and finishes. They are also available in locking and non-locking models. The major distinction between the two is that a cockspur handle is able to be locked using keys. The version that is keyed is typically used for high-security properties and is more secure than a standard handle.

Venetian handles are usually secured by two bolts, much like Espagnolette handles. They are low-projection from the frame and won't poke blinds through like other window handles. They are also ideal for apartments with high rises because they are easily cleaned from the inside. Window handles are the ideal choice if are looking for a chic and functional replacement double glazing handles for your upvc windows.

No matter what type of window you have, there's an appropriate handle for the style of window you have. If you are looking to replace a handle for your upvc window, you should consider the dimensions and shape of the screw holes, step height, spindle length and handing. The handle should be able to support the weight of the window when it is closed.

A tilt and turn handle is perfect for windows made of upvc which open from the side. It serves two purposes and lets you tilt and turn the window, which is helpful for ventilation, cleaning and security. It is also easy to use, even using only one hand. The handle can be used to lock the window in a wide open position or be tilted so you can take in the fresh air without worrying that burglars might enter.

Pear Drop handle for double glazed window

If you find that your uPVC window handle or lock is damaged, you'll be looking to replace it with a similar model. This is a relatively simple task that can be done yourself. First, ensure that your window is shut, then take off the screw at the base of the handle. After removing the two screws, the handle will come off. You'll then be able to access the multipoint lock and take it off. Once the new handle is made, put it in the correct position. If your handle is equipped with a an cap for screws, you should also replace it.

Espagnolette handles for doors are commonly employed on uPVC window frames. Recognised by their flat-strip shape, they work in conjunction with multipoint locks secured around the frame to offer the highest levels of security for your home. They can be set to open from either the left or right, and come in a variety of finishes.

Cockspur handles have a more traditional look. They are popular for heritage improvements, as well as for those who prefer an older-fashioned look. They have a shaft that runs through the handle and into the gearbox. This turns a series of shootbolt rod to secure the window.

Pear drop handles for patio doors provide a higher level of security and are more modern than cockspur-style handles. These handles are an excellent choice for anyone who wants to modernize their windows while maintaining the classic feel of their home.

The Cornish Heritage Tear Drop Espag Handle is inspired by 19th Century ironmongery and is perfectly suitable for casement windows with a heritage style, ensuring that your home's exterior is finished off with a stylish appearance. This handle can be used with the tear drop operating stay and dummy stays to make a completely matching heritage window.

Selecting the best replacement handle for uPVC window isn't easy. Our handy guide and helpful tips will help you get the most effective results. Bridgewater Glass can help you upgrade your entire window set or replace your existing uPVC handle and lock.

Tilt and Turn Handle

Double-glazed windows can be tilted up or down to allow for ventilation. Tilt-and-turn handles are employed. The handle rotates, and a locking mechanism activates when the window is slid in either direction. These windows are extremely popular in Europe. They permit better ventilation and are more secure. When replacing a uPVC tilt and turn handle, the new handle should be compatible with the window type and locking mechanism to ensure proper functionality and security.

Tilt-and-turn windows are generally constructed from uPVC or aluminum frames. Timber frames can be utilized by homeowners who prefer a more traditional appearance to their house. UPVC frames are the most value for money and are long-lasting, energy efficient, and require minimal maintenance. Aluminum frames, on the other hand, are a more expensive option, but they offer the strongest strength and resistance to corrosion.

The uPVC handle tilts and turns in a similar manner as an espagnolette, however it is more heavy and bulkier due to the fact that it is used on larger windows. They are also more robust because they are able to endure much more force as the window opens inwards and can be tilted.

The most important thing to consider when replacing a tilt-and-turn handle is that it can be locked into one of four positions. This will stop the window from being opened all the way into the room. It is possible to accomplish this using a lock key. This is especially helpful when there are small children in the area, since it keeps them from opening the windows too far.

The majority of tilt-and-turn window handles will have this feature included as standard. Cheap Chinese products aren't the only exception. Sealco Scotland stock a wide assortment of premium tilt and turn handles from manufacturers like Hoppe, Trojan, and Sensei.

It is essential to measure the handle you have before you purchase a tilt-and-turn handle. This will assist you to identify the appropriate design. You will need the distance between the screw holes, which is typically 43mm centre-to-centre. Some handles could have screws hidden by covers or a spring loaded backplate, which means you will have to remove them gently before you can reveal the fixing positions.