15 Reasons You Must Love Upvc Window Replacement Hinges

Choosing Upvc Window replacement hinges for double glazed windows Hinges

The process of selecting and fitting upvc window hinges for replacement isn't as difficult as you may think. It is crucial to ensure that the arrow on the hinges is facing the right way and also the thickness (13mm or 17mm) of the hinge arm on the opening frame.

There are many different kinds of hinges, each with its distinctive characteristics. This article will review some of the most common uPVC hinges, and their advantages.

Egress/Easy Clean Hinge

They are a great choice to replace or upgrade a fire escape safety window because they are able to open at a 90-degree angle. They can also be lowered to an easy clean position to allow you to easily access the outside of your windows to clean them without the need to climb a ladder or lean over at potentially hazardous angles.

These heavy duty egress hinges are manufactured by Yale, one of the most popular and trusted home security brands available today. They can be used with all types of uPVC side-hung windows. By pressing a small button the window sash is moved to the side, and then into the easy-cleaning position. When the window is closed, the sash will revert to its original position.

Both 13mm and 17mm are available. Make use of our Egress Selection Guide to help you select the best product for your window.

These hinges can be used with traditional side-hung frames made from aluminum or uPVC. They are fitted with an easy-to-use friction screw to adjust the amount of resistance that is generated. This makes opening the window easier and reduces the chances of a mistaken closing in strong winds. They have been tested for over thirty thousand cycles, and they are compliant with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

The Nico Egress Easy Clean friction hinge is easy to use and does not have buttons or catch. It offers a convenient and safe option to emergency exit and cleaning. Press the hinge retention clip located on the inner corner of the bottom corner. This will release the top and bottom catches and allow you to slide the sash back into the clean position. Close the window when you are in the easy-cleaning position. This will set the hinges back to their Egress positions.

Fire-Escape Hinge

Fire Escape Hinges are often referred to as "Easy Clean" hinges are used to replace side opening windows for escape (fire safety) reasons. These kinds of hinges for windows are more spacious and more efficient than standard hinges to allow an expansive clear opening to escape in the case of an emergency fire. The building regulations state that this kind of hinge must be installed in any space that is habitable and has a window.

They feature a unique friction stay that allows the window to open at 90 degrees and also allows the sash opening to slide across when open for easy cleaning of the external side of the glass without having to use ladders. The hinges do not have buttons or catches and are operated by an easy, secure lever that can be accessed from inside the home.

The hinges, made in the UK by Cotswold and Cotswold, have a child safety feature for everyday use. This can be overridden with a hidden button. You will have peace of assurance that your children will not accidentally open the windows too wide. The stack heights are 13mm or 17mm.

Take a measurement of the length of the existing side-hung window hinge that is attached to the frame. (See the guide on measuring Upvc Window Hinge Problems window hinges). Select the correct size hinge below.

It is important to note that the measurement is taken from the part that is fixed to the frame, not the sash, the actual hinge length may be longer or shorter depending on the manufacturing process of your old windows. When choosing the width of your hinge, the majority of upvc windows can be fitted with 13mm stack height, however should your window frame has 17mm, then select the option that fits this. You can also use the 4mm packer in order to make up the difference. All the hinges are supplied handed (1 left and 1 right). Screws are not included with the hinges. They can be purchased separately if required. We suggest using our upvc window hinge repair screws. These screws are designed to improve the performance of your hinges and allow them to work effortlessly for a longer. They have a lower friction design, and an improved weather seal with a new nylon reducer end cap.

Restricted Hinge

There are times when windows must open fully and this can be difficult with a standard hinge. These restricted child safety friction hinges help to overcome this issue and offer a fantastic solution when ventilation is needed but access to clean up or escape in the case of fire is not possible. They function by limiting the amount the sash can open and allowing the control of this limitation with an option. They are available in 13mm and 17mm stack heights. They can be used for both side and top hung windows.

The Nico Restricted Egress Friction hinge combines the advantages of a standard restrictor as well as an escape hinge to offer an efficient and simple method to meet building regulations. It is suitable for side-hung and top opening uPVC windows and is available in 13mm and 17mm stack heights. It comes in a pair, with one hinge being the restricted egress, and the other the unrestricted. This allows one to be installed at the bottom and the other is installed on top.

These uPVC hinges are designed to be used on windows that cannot be fully opened, like a child's bedroom. The mechanism restricts the amount the sash can open up to the safety level of 100mm and re-engages when the casement window hinge types is closed.

These uPVC friction-type hinges can be used with all types of windows. They are particularly suitable for windows that are hard to reach, like those in three-storey homes or those that require a ladder. They can be paired with our range of security enhancements such as hinge guards, protection plates for hinges or dog bolts to offer PAS 24 performance.

When replacing a hinge on a window, it is essential to measure the length of the current hinge so that you can order replacements that match in size. The easiest way to accomplish this is by looking at the hinge in the gallery and working out the best place for it to be. Top-hung hinges are limited on both sides and the side hung hinges can only be used only on one side.

Standard Hinge

Standard hinges feature metal-to-metal contacts and don't require additional components to reduce friction. It is available in many finishes and has an NFPA-certified fire rating. To determine the radius of your hinge put it on its flat surface tilt and turn hinges for upvc windows then line up with a quarter and dime in two corners. If the quarter is more snug than the corner, then it should be turned to 5/8 inches.

The right hinge can make or break the appearance of your door. It's important to match the finish and style of your door with the hinges to create a unified appearance that is both functional and visually attractive.