5 Fiat Key Cover Lessons Learned From Professionals

How to Find a Fiat 500 Spare Key

Fiat's classic Fiat 500 has become an icon since its relaunch in 2007. The company is now kicking into a larger offensive toward different powertrains by launching a mild-hybrid version.

Replacing the battery for the key fob on a Fiat 500 is straightforward and cheap. The Fiat main dealer will hand over the key in approximately 10 days.

Diagnostics of a fault

The key fob houses an electronic chip that communicates with the Fiat immobiliser system to ensure that only authorised vehicles can start the engine. If the transponder chip inside your key fob is damaged, it will not be able to link up to the immobiliser unit, which means that your car won't be able to start.

It is possible to repair the key fob of a person who has been damaged, as long as the chip isn't physically damaged. Locksmiths who are professionals will use dealer-standard technologies to repair the chip quickly.

By using an OBD scanner, it's possible to check if the fob is still communicating with the receiver module. This is a simple procedure and provides an initial indication of where the problem lies. If the OBD scanner says there is no communication between the transmitter and receiver modules, it might be necessary for the fob's transmitting module to be replaced. This is a costly option and should be left to a locksmith.

Dead Coin Battery

A dead battery on a coin is the most common reason for the key fob not to work. It's an easy fix that only takes only a few minutes. Make sure that the key fob can be seen by your vehicle. Then, try pressing the "Lock" or "Unlock" button to test if it responds.

If the key fob isn't in range, it might not be responsive at all, or might only work intermittently. This could be a sign of a bad circuit board. In this scenario you'll need to check your owner's manual for instructions on how to reprogram the key fob.

You can change the battery by taking off the mechanical latch on the back of the fob (see the image below). Then, gently pull the edge of the battery holder away from the switch to take out the old battery. Insert a new #CR2032 3 volt battery into the fob with the "+ side" facing the cover at the rear and the "- side" directed towards the rubber buttons.

Water Damage

Although the key fob comes with rubber seals that keep water out of the chip inside, it's not waterproof. A splash of rain or washing cycle is likely to be acceptable but submerging it fob in ocean or pool water is likely to damage it.

The key fob needs to be reprogrammed when it is exposed to water. You can follow the instructions in your owner's manual or go to a professional locksmith or fiat key duplication dealer.

Another reason that a fob won't work is because it's out of range from your car. Key fobs generally have a range of 30 feet and if they're far from your car, it won't recognize them. The first thing to try is to move closer to your vehicle. If this fails, you may require replacing the key fob. You can find instructions on how to replace the battery in most vehicles on YouTube or by reading the owner's guide. It is a good idea to think about purchasing a replacement key fob if the one you have is beginning to appear worn and dented.

Faulty Receiver Module

In more modern models of Fiat cars it is not necessary to have an actual key to open the car or start it. These cars have the key fob which sends a wireless signal to the car to turn on and off the engine. Locksmiths can repair the damaged keyfob. Leave this job to the professionals and save time and money. They can also program the new key for your fiat punto key.

You will need to give the locksmith a few details over the phone if you want a spare Fiat key. You'll need to provide the locksmith details about your car, such as the year of its production and the model. This is important because the locksmith will need this information to make sure that the new key will work with the locks in place.

You must be aware that not all locksmiths are able to make replacement keys for fiat spare key vehicles. You need to look for one with a solid reputation and experience in this particular field. This means that you are certain that the key will work with your vehicle and you will not waste money.

Keys that are unpaired

The most frequent reason for a key-fob not functioning is a dead coin-cell battery. The key fob comes with metal retaining clips that hold the button cell in place and complete the circuit, in the event that they wear out or loosened, it can lead to contact problems and a lack of power. Replace the battery with a new one of the same voltage, size and specifications, or a spare.

It is essential to dry out the key fob if it is submerged in liquid. Using isopropyl or electronic cleaner is a suitable method to do this. It is also recommended to remove the battery and clean the circuit board and replace it prior to replacing.

If you're unable find a spare key your best option is to call a locksmith. A locksmith who is certified to reprogram Fiat transponder keys can do it without the need to see the original keys. This is a faster and less expensive option rather than waiting for the original fiat remote key replacement (klitgaard-peele.thoughtlanes.net published a blog post) key from Italy to arrive. A professional locksmith will also have all the tools and equipment needed to complete the replacement in as little time as is possible.