A New Trend In Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain, durable and long-lasting. They do not rot or rust like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is important to ensure that your windows are in good working order.

For single pane windows it is relatively easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case you'll need find some plastic spacers that aid the new pane in being able to fit properly into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you start working on the glass, so that any shards will fall on the fabric instead of landing on the floor, where they could be trodden under and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will keep drafts and water from entering your home until a professional arrives to repair the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. As time passes, they may develop a variety of issues, including sagging. A window repairs near me that is sagging can cause problems with light, draughts or even security. It's important to take action as soon as you notice your uPVC windows are sliding.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll need to open the window so that you can get to the frame. Then, using an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you have relocated your hinges. If you're satisfied with the fit of the window, you can tighten screws to hold them in place.

If you are unable to move the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes them to lose tightness. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows remain watertight and secure from draughts.

uPVC handles may also loosen. Often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. First, you'll need close your window and do a test to ensure that it fits. The corners of the sash must be aligned with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is a relatively easy fix that can be completed by any competent DIYer. Based on the severity of the issue the old caulking might need to be removed before a new layer of caulk is applied. It is important to keep in mind that when it is about upvc window repairs (discover this) you should not be tempted to 'over-caulk and then make the area harder to clean and reduce the efficiency of your energy.

Make sure that the drainage holes are free of debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more severe cases, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to note that if the leakage originates from the glass of your double-glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your upvc window repair window is difficult to open or if it blows open with the breeze. They can be easily repaired by any DIYer who is skilled and are usually done within a few minutes.

Like any mechanical component, hinges can be damaged over time. It's easy to replace a hinge on a window, but it's easier if someone else helps hold the frame.

Check that the upvc window repair hinges are closed and open in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue can be caused either by opening the window incorrectly or by a poor installation at the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be happy to give you suggestions.

It is also essential to lubricate the hinges regularly. Applying a light engineering lubricant on the hinges is an ideal method to accomplish this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It can also prevent corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 or other solvent-based oils should not be used since they can cause damage to your upvc window repair windows.

5. Draughts

Draughts can be caused by a variety of different causes. First, the hinges due to wear and tear may become displaced, which will cause a gap to form between the sash and the frame. If they are beyond repair, it may be necessary to have them realigned. The interlock may be misaligned. This is located on the hinge's side, and might require to be cleaned. In some cases, it may be necessary to replace them.

The seals may wear out or get damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures, and also lessen the risk of draughts.

Another, and most effective methods to reduce draughts is by using an draught excluder. These are typically fabric tubes that are filled with some kind of filler. They can be positioned on the windowsill on top. These will keep your home warm by blocking cold air.

With a bit of regular maintenance and repair your windows made of upvc will continue to provide a great level of security and insulation for your home. It is essential to remember that all windows will eventually get worn out and it could be more cost-effective to simply replace them instead of fixing them. If you are experiencing problems with your upvc windows, it is recommended to seek help from a professional immediately.