See What Saab 9-3 Key Replacement Tricks The Celebs Are Using

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a unique set of steps to take to add another key. This requires the use of a handheld computer called Tech-2, to be used by the dealer. Then a new key and transponder must be purchased and programmed to the car.

Change your keys regularly to prevent one from deteriorating faster than another. This will help keep your keys in perfect condition.

Replacement Case

The new key fobs aren't like the older Saab keys. They are equipped with electronics which make it hard to duplicate. This has made stealing cars a lot more difficult than it was twenty years ago. It also makes it more expensive to replace lost keys.

Saab 9-3 owners must have two keys that work. It is expensive to replace a lost key as it requires replacing the CIM module, and reconfiguring the locking cylinders. Dealers will typically charge $100-$200 to do this.

There are some ways around the high price. Some parts suppliers will search for the code from an extra key (usually the same one that opens the doors and switches the ignition) and cut a brand new key blade from metal for less than the dealer's cost. The key must be the exact same as the original in order for it to function in your vehicle.

You can also replace the case yourself by following these steps. You'll need an flathead screwdriver and patience. With the screwdriver you can pull away the plastic and take out the emergency key. When the case is opened remove all electronics and place them into your new case. Make sure to insert the correct badge and key back in the case too.

Replacement Battery

The Saab 9-3 replacement battery is a budget component that can be easily and quickly replaced. This video tutorial on DIY from YouTube Cyclone Cyd shows how to replace the battery of the remote key fob in only four steps. This tutorial should work for any modern saab replacement key-type key fob, however, the procedure may differ slightly.

The first step is to locate the button that releases the backup key within the fob. It is usually located near the saab centre milton keynes logo on the back of the fob. Next take a flathead screwdriver into the small hole of this button. This should be enough to unlock the fob's case to allow you to replace the battery.

Once the new CR1632 battery is installed it is possible to reassemble the remote key fob and program it to your car. The entire process shouldn't take more than one hour. It's a simple process that does not require any special equipment.

If you lose your key, the procedure will be slightly more complicated however, it can be done. The dealer must read the car's VIN and then order a replacement key blade and TWICE module, both with the correct unique code. After that, they'll need to cut the replacement key and then program it with a brand new tool for programming called MDI.

Replacement Key Fob

The key fob is a device that locks and unlocks your car. It is equipped with a battery inside. Batteries are able to last for a short time and eventually will die. This is a problem that happens to all cars and the good news is that you can replace the batteries in many key fobs without having to replace the entire case. Amazon sells replacement fobs with all the electronics installed. It is easy to remove the case and replace the batteries. It's important to note that you'll need to remove the emergency key first, and you can do this by inserting an incredibly small screwdriver with a flat head into the slot found in the middle of the case. The case should split when you work the screwdriver all around it.

If you're looking to replace your keys, be sure to have an extra set on hand. This will save you a significant amount of money. If you have an extra key, you can request the dealer to cut the key and program it for your vehicle. This is much cheaper than purchasing a new key fob.

It is possible to add another key to your vehicle if you don't already have one, but it requires a great deal of research and work. A second key can cost about a few hundred dollars and it also requires programming of the car's computer. Professionals can accomplish this but it's not a cheap option.

Replacement Ignition

In contrast to the earlier saab 93 key programming automobiles, the current saab ignition key 9-3 models have an advanced alarm system that is built on a key code. If you lose only one key, it may be costly to replace it with another one since the car needs to include a computer and be programmed to accept a new key. Most locksmiths cannot do this or even a dealer will charge several hundred dollars just to program the new key!

If you've lost the only working key the dealer will replace your car's computer (known as the CIM or Saab 9-3 Key TWICE) to create a replacement, and they will charge top dollar for it. We can reprogram the existing EEPROM of your car's computer to be ready to accept an additional key. This will save you more than 50% of the cost you spend at the dealer.

If you've owned a car like the saab key replacement bristol 9-3 for a long time and you're aware of the ignition keys aren't very durable. They can become incredibly sticky and the buttons are known to be ripped off from time to time It is recommended that you consider purchasing a new one if yours isn't working as it should. Fortunately, replacing the ignition key isn't as difficult as it sounds, and it can be done fairly quickly with the right tools.